Subject: [Sirgas-Mail] No.2900: Trimble Firmware 5.45 para receptores NETR9 y ALLOY From: Laura Sanchez Estimados Amigos: De acuerdo con los centros de anlisis del IGS, se requiere de la actualizacin del firmware de todos los receptoresTRIMBLE NETR9 and TRIMBLE ALLOY (ver mensaje anexo). Saludos cordiales, Laura Sanchez IGS-RNAAC-SIRGAS -------- Weitergeleitete Nachricht -------- Betreff: [IGSSTATION-7944] Trimble Firmware 5.45 for NETR9 and ALLOY receivers Datum: Thu, 7 May 2020 07:51:41 -0600 Von: David Maggert An: igsstation@lists.igs.org Kopie (CC): IGS Central Bureau Dear Colleagues, We are requesting IGS station operators with TRIMBLE NETR9 and TRIMBLE ALLOY receivers to update to firmware version 5.45. This firmware version provides several fixes for receiver generated RINEX files and some other improvements, e.g. * QZSS tracking: Firmware 5.45 fixes issues with QZSS GEO 3 observable bias by improving the receivers ability to track the QZSS geostationary satellite. * BDS tracking: Adjusted the receivers ability to detect partial BeiDou ephemeris information. * Corrected formatting issues with BDUT (BeiDou to UTC) and GLUT (GLONASS to UTC) in RINEX ephemeris files. * Revised the BeiDou week number and time of the week in the BeiDou TIME SYSTEM CORR file. * Updated the time reference to comply with future leap seconds in the BeiDou navigation message header. * Added BeiDou Gen III B2B support in the Trimble Alloy. (Note: NetR9 does not support BeiDou Gen III signals) Trimble Alloy station operators are asked to enable the tracking of the BDS-3 B2b signal, see page 4 of the firmware release notes available at http://trl.trimble.com/docushare/dsweb/Get/Document-856630/Infrastructure%20Release%20Notes%20v5.45.pdf Best Regards, David Maggert, Network Coordinator Nacho Romero, Infrastructure Committee Chair _______________________________________________ IGSSTATION mailing list IGSSTATION@lists.igs.org https://lists.igs.org/mailman/listinfo/igsstation

Estimados Amigos:

De acuerdo con los centros de anlisis del IGS, se requiere de la actualizacin del firmware de todos los receptoresTRIMBLE NETR9 and TRIMBLE ALLOY (ver mensaje anexo).

Saludos cordiales,
Laura Sanchez
IGS-RNAAC-SIRGAS


-------- Weitergeleitete Nachricht --------
Betreff: [IGSSTATION-7944] Trimble Firmware 5.45 for NETR9 and ALLOY receivers
Datum: Thu, 7 May 2020 07:51:41 -0600
Von: David Maggert <dmaggert@unavco.org>
An: igsstation@lists.igs.org
Kopie (CC): IGS Central Bureau <cb@igs.org>


Dear Colleagues,


We are requesting IGS station operators with TRIMBLE NETR9 and TRIMBLE ALLOY receivers to update to firmware version 5.45. This firmware version provides several fixes for receiver generated RINEX files and some other improvements, e.g.

* QZSS tracking: Firmware 5.45 fixes issues with QZSS GEO 3 observable bias by improving the receivers ability to track the QZSS geostationary satellite.
* BDS tracking: Adjusted the receivers ability to detect partial BeiDou ephemeris information.
* Corrected formatting issues with BDUT (BeiDou to UTC) and GLUT (GLONASS to UTC) in RINEX ephemeris files.
* Revised the BeiDou week number and time of the week in the BeiDou TIME SYSTEM CORR file.
* Updated the time reference to comply with future leap seconds in the BeiDou navigation message header.
* Added BeiDou Gen III B2B support in the Trimble Alloy. (Note: NetR9 does not support BeiDou Gen III signals)

Trimble Alloy station operators are asked to enable the tracking of the BDS-3 B2b signal, see page 4 of the firmware release notes available at http://trl.trimble.com/docushare/dsweb/Get/Document-856630/Infrastructure%20Release%20Notes%20v5.45.pdf


Best Regards,

David Maggert, Network Coordinator
Nacho Romero, Infrastructure Committee Chair

_______________________________________________
IGSSTATION mailing list
IGSSTATION@lists.igs.org
https://lists.igs.org/mailman/listinfo/igsstation